MAX1007CAG View Datasheet(PDF) - Maxim Integrated
Part Name
Description
View to exact match
MAX1007CAG Datasheet PDF : 12 Pages
| |||
Mobile-Radio Analog Controller
ABSOLUTE MAXIMUM RATINGS
AVDD or DVDD to AGND or DGND ...........................-0.3V to +6V
Digital Inputs to DGND.............................................-0.3V to +6V
Analog Inputs to AGND............................................-0.3V to +6V
REF to AGND............................................................-0.3V to +6V
AGND to DGND .................................................................± 0.3V
AVDD to DVDD....................................................................± 0.3V
Maximum Current into Any Pin............................................50mA
Continuous Power Dissipation (TA = +70°C)
SSOP (derate 8.0mW/°C above +70°C) ......................640mW
Operating Temperature Ranges
MAX1007CAG.....................................................0°C to +70°C
MAX1007EAG ..................................................-40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10sec) .............................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(AVDD = DVDD = +2.85V to +3.6V, fSCLK = 1.152MHz, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
POWER-SUPPLY REQUIREMENTS
Supply Voltages
AVDD, DVDD
SUPPLY CURRENTS [I(AVDD) + I(DVDD)] (Note 1)
CONDITIONS
MIN TYP MAX UNITS
2.85 3.0
3.6
V
Transmit Mode 1:
All DACs, Ref, RefBuf Active
RxEN = 0, TxEN = 1; AVDD = DVDD = 3V;
PKWDW = ADCCTRL = DGND
1.8
5.0
mA
Transmit Mode 2:
All DACs, PGA, REF, Peak
Detector, PSBIAS, ISOURCE,
RefBuf Active
Transmit Mode 3:
All DACs, PGA, REF, Peak
Detector, PSBIAS, ISOURCE,
RefBuf, ADC Active
RxEN = 0, TxEN = 1; AVDD = DVDD = 3V;
PKWDW and ADCCTRL as per state B on Figure 1
RxEN = 0, TxEN = 1; AVDD = DVDD = 3V;
PKWDW and ADCCTRL as per state C on Figure 1
4.7
mA
12.2
32
mA
Receive Mode 1:
KDAC, XDAC, Ref, RefBuf
Active
RxEN = 1, TxEN = 0; AVDD = DVDD = 3V;
PKWDW = ADCCTRL = DGND
1.24
3.5
mA
Receive Mode 2:
KDAC, XDAC, Peak Detector,
RSSI Buffer, Ref, RefBuf Active
RxEN = 1, TxEN = 0; AVDD = DVDD = 3V; PKWDW and
ADCCTRL as per state B on Figure 1
2.95
mA
Receive Mode 3:
KDAC, XDAC, ADC, Peak
Detector RSSI Buffer, Ref,
RefBuf Active
RxEN = 1, TxEN = 0; AVDD = DVDD = 3V; PKWDW and
ADCCTRL as per state C on Figure 1
11.2
31
mA
Receive Mode 4:
KDAC, XDAC, ADC, RSSI
Buffer, Ref, RefBuf, PSD
Circuit Active
RxEN = 1, TxEN = 0; AVDD = DVDD = 3V; PKWDW and
ADCCTRL as per state B on Figure 1. PSDWDW and PSD-
CNTRL as per state D on Figure 2
4.07 10.5 mA
Standby:
XDAC, GDAC, Ref, RefBuf Active
RxEN = 1, TxEN = 1; AVDD = DVDD = 3V
1.24
3.5
mA
Total Shutdown
RxEN = 0, TxEN = 0; AVDD = DVDD = 3V;
ADCCTRL = PSDCTRL = PKWDW = PSDWDW = DGND;
SCLK not active, either high or low
1
10
µA
2 _______________________________________________________________________________________
|
|
Share Link: 