datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

AH101J View Datasheet(PDF) - Unspecified

Part Name
Description
View to exact match
AH101J Datasheet PDF : 18 Pages
First Prev 11 12 13 14 15 16 17 18
SAFETY STANDARDS REGULATED, REINFORCED
INSULATION TYPE, AH SERIES
POE-D10-00-E-13
Ver: 13 Page: 17 / 18
9.3.2 Soldering:
When soldering this product to a PCB/PWB, do not exceed the solder heat resistance
specification of the capacitor. Subjecting this product to excessive heating could melt the
internal junction solder and may result in thermal shocks that can crack the ceramic element.
When soldering capacitor with a soldering iron, it should be performed in following
conditions.
Temperature of iron-tip: 400 degrees C. max.
Soldering iron wattage: 50W max.
Soldering time: 3.5 sec. max.
9.3.3 Cleaning (ultrasonic cleaning):
To perform ultrasonic cleaning, observe the following conditions.
Rinse bath capacity: Output of 20 watts per liter or less.
Rinsing time:5 min maximum.
Do not vibrate the PCB/PWB directly.
Excessive ultrasonic cleaning may lead to fatigue destruction of the lead wires.
"Failure to follow the above cautions may result, worst case, in a short circuit and cause
fuming or partial dispersion when the product is used."
9.4 Caution (Handling):
Vibration and impact
Do not expose a capacitor or its leads to excessive shock or vibration during use.
"Failure to follow the above cautions may result, worst case, in a short circuit and cause
fuming or partial dispersion when the product is used."
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]