datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

S29AL016 View Datasheet(PDF) - Spansion Inc.

Part NameDescriptionManufacturer
S29AL016 16 Megabit (2 M x 8-Bit/1 M x 16-Bit) CMOS 3.0 Volt-only Boot Sector Flash Memory Spansion
Spansion Inc. Spansion
S29AL016 Datasheet PDF : 55 Pages
First Prev 31 32 33 34 35 36 37 38 39 40 Next Last
Data Sheet
12. Absolute Maximum Ratings
Storage Temperature Plastic Packages
Ambient Temperature with Power Applied
–65°C to +150°C
–65°C to +125°C
Voltage with Respect to Ground
VCC (Note 1)
A9, OE#, and RESET# (Note 2)
–0.5 V to +4.0 V
–0.5 V to +12.5 V
All other pins (Note 1)
Output Short Circuit Current (Note 3)
–0.5 V to VCC+0.5 V
200 mA
Notes
1. Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions, input or I/O pins may overshoot VSS to –2.0 V for periods of
up to 20 ns. See Figure 13.1 on page 36. Maximum DC voltage on input or I/O pins is VCC +0.5 V. During voltage transitions, input or I/O
pins may overshoot to VCC +2.0 V for periods up to 20 ns. See Figure 13.2 on page 36.
2. Minimum DC input voltage on pins A9, OE#, and RESET# is -0.5 V. During voltage transitions, A9, OE#, and RESET# may overshoot VSS
to –2.0 V for periods of up to 20 ns. See Figure 13.1 on page 36. Maximum DC input voltage on pin A9 is +12.5 V which may overshoot to
14.0 V for periods up to 20 ns.
3. No more than one output may be shorted to ground at a time. Duration of the short circuit should not be greater than one second.
4. Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only;
functional operation of the device at these or any other conditions above those indicated in the operational sections of this data sheet is
not implied. Exposure of the device to absolute maximum rating conditions for extended periods may affect device reliability.
13. Operating Ranges
Industrial (I) Devices
Ambient Temperature (TA)
-40°C to +85°C
Extended (N) Devices
Ambient Temperature (TA)
-40°C to +125°C
VCC Supply Voltages
VCC for standard voltage range 2.7 V to 3.6 V
Operating ranges define those limits between which the functionality of the device is guaranteed.
Figure 13.1 Maximum Negative Overshoot Waveform
+0.8 V
20 ns
20 ns
–0.5 V
–2.0 V
20 ns
Figure 13.2 Maximum Positive Overshoot Waveform
VCC
+2.0 V
VCC
+0.5 V
2.0 V
20 ns
20 ns
36
S29AL016D
S29AL016D_00_A8 February 27, 2009
Direct download click here

 

Share Link : 

All Rights Reserved © datasheetbank.com 2014 - 2020 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]