6. Ordering Information
This product has been retired and is not recommended for designs. For new and current designs, S29AL016J
supercedes S29AL016D. This is the factory-recommended migration path. Please refer to the S29AL016J
data sheet for specifications and ordering information.
S29AL016D Standard Products
Spansion standard products are available in several packages and operating ranges. The order number
(Valid Combination) is formed by a combination of the elements below.
I 01 0
0 = Tray
1 = Tube
2 = 7” Tape and Reel
3 = 13” Tape and Reel
01 = VCC = 2.7 - 3.6V, top boot sector device
02 = VCC = 2.7 - 3.6V, bottom boot sector device
I = Industrial (-40°C to +85°C)
N = Extended (-40°C to +125°C)
Package Material Set
A = Standard
F = Pb-Free
T = Thin Small Outline Package (TSOP) Standard Pinout
B = Fine-pitch Ball-Grid Array Package
M = Small Outline Package (SOP) Standard Pinout
70 = 70 ns Access Speed
90 = 90 ns Access Speed
16 Megabit Flash Memory manufactured using 200 nm process technology
3.0 Volt-only Read, Program, and Erase
S29AL016D Valid Combinations
TS048 (Note 3)
0, 2, 3
VBK048 (Note 4)
0, 1, 3
SO044 (Note 3)
1. Type 0 is standard. Specify other options as required.
2. Type 1 is standard. Specify other options as required.
3. TSOP and SOP package markings omit packing type designator from ordering part number.
4. BGA package marking omits leading S29 and packing type designator from ordering part number.
Valid Combinations list configurations planned to be supported in volume for this device. Consult your local
sales office to confirm availability of specific valid combinations and to check on newly released
February 27, 2009 S29AL016D_00_A8