datasheetbank_Logo   Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name :   

ALFG1PF09 View Datasheet(PDF) - Unspecified

Part NameDescriptionManufacturer
ALFG1PF09 Ideal for solar inverter compact size, 1a 22A/33A power relays LF-G RELAYS (ALFG) ETC
Unspecified 
ALFG1PF09 Datasheet PDF : 6 Pages
1 2 3 4 5 6
LF-G (ALFG)
DIMENSIONS (mm inch)
CAD Data
15.7
.618
The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/
External dimensions
PC board pattern (Bottom view)
23.3
0.5 .917
.020
.0729.0ddiaia. .
27.6±0.1
1.087±.004
13.8±0.1
.543±.004
2.0.0d7i9a.dia.
22.0
.866
27.6
1.087
30.1
1.185
12.0
.472
4.0
.157
1..087d1iad.ia.
12.0±0.1
.472±.004
12.0±0.1
.472±.004
.0711.8ddiaia. .
10.0±0.1
.394±.004
Tolerance: ±0.1 ±.004
Schematic (Bottom view)
NO
COM
Dimension:
General tolerance
Less than 1mm .039inch:
±0.1 ±.004
Min. 1mm .039inch less than 3mm .118 inch: ±0.2 ±.008
Min. 3mm .118 inch:
±0.3 ±.012
SAFETY STANDARDS
Certification authority
UL/C-UL
VDE (VDE0435)
Standard type
Contact Gap 1.5 mm .059 inch type
Contact Gap 1.8 mm .071 inch type
22A 277V AC General Use (at 85°C 185°F)
22A 250V AC cosφ = 0.8 (at 85°C 185°F)
High capacity type
Contact Gap 1.5 mm .059 inch type
Contact Gap 1.8 mm .071 inch type
31A 277V AC General Use (at 85°C 185°F)
31A 250V AC cosφ = 0.8 (at 85°C 185°F)
33A 277V AC General Use (at 85°C 185°F)
33A 250V AC cosφ = 0.8 (at 85°C 185°F)
NOTES
Usage, transport and storage
conditions
1) Temperature:
–40 to +60°C –40 to +140°F (When
nominal coil voltage applied)
–40 to +85°C –40 to +185°F (When coil
holding voltage is 45% to 80% of the
nominal coil voltage)
2) Humidity: 5 to 85% RH
(Avoid freezing and condensation.)
The humidity range varies with the
temperature. Use within the range
indicated in the graph below.
3) Atmospheric pressure: 86 to 106 kPa
Temperature and humidity range for
usage, transport, and storage
Humidity, %RH
85
Tolerance range
(Avoid freezing (Avoid
when used at
condensation
temperatures lower when used at
than 0°C 32°F) temperatures
higher than
5 0°C 32°F)
–40
0
–40
+32
60
+140
Temperature, °C °F
Humidity, %RH
85
Tolerance range
(Avoid freezing (Avoid
when used at condensation
temperatures when used at
lower than
temperatures
0°C 32°F)
higher than
0°C 32°F)
5
–40
0
–40
+32
85
+185
Temperature, °C °F
–40 to +85°C –40 to +185°F (When 45% to
80%V of coil holding voltage)
4) Condensation
Condensation forms when there is a
sudden change in temperature under
high temperature and high humidity
conditions. Condensation will cause
deterioration of the relay insulation.
5) Freezing
Condensation or other moisture may
freeze on the relay when the
temperatures is lower than 0°C 32°F. This
causes problems such as sticking of
movable parts or operational time lags.
6) Low temperature, low humidity
environments
The plastic becomes brittle if the relay is
exposed to a low temperature, low
humidity environment for long periods of
time.
Solder and cleaning conditions
1) Please obey the following conditions
when soldering automatically.
(1) Preheating: Within 120°C 248°F
(solder surface terminal portion) and
within 120 seconds
(2) Soldering iron: 260°C±5°C
500°F±41°F (solder temperature) and
within 6 seconds (soldering time)
2) Since this is not a sealed type relay, do
not clean it as is. Also, be careful not to
allow flux to overflow above the PC board
or enter the inside of the relay.
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
–5–
© Panasonic Corporation 2013 ASCTB196E-1 201307-T
Direct download click here
 

Share Link : ETC
All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]