datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

LC78834M View Datasheet(PDF) - SANYO -> Panasonic

Part Name
Description
View to exact match
LC78834M Datasheet PDF : 14 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
LC78834M
• R-string DAC
The R-string DAC is a 9-bit D/A converter that consists of 512 (= 29) individual resistors (each with resistance R)
connected in series that divide the voltage applied at the ends of that resistor string into 512 equal sections. Two
adjacent potentials, V1 and V2, of the voltage divided potentials, are selected by a switching circuit according to
the upper 9 bits of the data (D9 to D15). These two potentials are output to the PWM DAC. Note that V2 – V1 will
be equal to (VH – VL)/512.
• PWM DAC
The PWM DAC is a 3-bit D/A converter that divides the span of the two potentials V1 and V2 output from the R-
string DAC by eight. This circuit outputs one or the other of the two potentials V1 and V2 from the CH1OUT (or
CH2OUT) pin depending on the value of the middle three bits (D6 to D8) of the data.
• Level-shift DAC
The level-shift DAC is a 6-bit D/A converter that consists of two variable resistors, VRH and VRL, inserted in
series at the ends of the R-string DAC resistor string. The level-shift DAC controls the VRH and VRL variable
resistors according to the lower six bits of the data (D0 to D5) as follows.
— The sum of the resistances of VRH and VRL is held constant for all values of the data.
— The values of VRH and VRL are set to be between 0 and 63 times R/512 according to the value of the data.
(Here, R is the value of the resistance of the individual resistors in the R-string DAC.)
This changes the values of the R-string DAC outputs V1 and V2 in the range 0 to 63 × V/512
(where V = (VH – VL)/512) in steps of V/512.
• Reference resistors RH and RL
Capacitors (about 10 µF) must be connected between REFH and AGND and between REFL and AGND.
When AVDD = 5.0 V and AGND = 0 V, the LC78834M’s maximum output amplitude should be set to be the range
1.3 to 3.7 V (2.4 Vp-p) for a 0 dB playback level by the resistors RH and RL.
No. 4838-10/14
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]