datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

CAT25C128KA-TE13 View Datasheet(PDF) - Catalyst Semiconductor => Onsemi

Part Name
Description
View to exact match
CAT25C128KA-TE13
Catalyst
Catalyst Semiconductor => Onsemi Catalyst
CAT25C128KA-TE13 Datasheet PDF : 11 Pages
1 2 3 4 5 6 7 8 9 10
CAT25C128/256
STATUS REGISTER
The Status Register indicates the status of the device.
The RDY (Ready) bit indicates whether the CAT25C128/
256 is busy with a write operation. When set to 1 a write
cycle is in progress and when set to 0 the device
indicates it is ready. This bit is read only
The WEL (Write Enable) bit indicates the status of the
write enable latch . When set to 1, the device is in a Write
Enable state and when set to 0 the device is in a Write
Disable state. The WEL bit can only be set by the WREN
instruction and can be reset by the WRDI instruction.
The BPO and BP1 (Block Protect) bits indicate which
blocks are currently protected. These bits are set by the
user issuing the WRSR instruction. The user is allowed
STATUS REGISTER
7
6
5
4
WPEN
X
X
X
to protect quarter of the memory, half of the memory or
the entire memory by setting these bits. Once protected
the user may only read from the protected portion of the
array. These bits are non-volatile.
The WPEN (Write Protect Enable) is an enable bit for the
WP pin. The WP pin and WPEN bit in the status register
control the programmable hardware write protect fea-
ture. Hardware write protection is enabled when WP is
low and WPEN bit is set to high. The user cannot write
to the status register (including the block protect bits and
the WPEN bit) and the block protected sections in the
memory array when the chip is hardware write pro-
tected. Only the sections of the memory array that are
not block protected can be written. Hardware write
protection is disabled when either WP pin is high or the
WPEN bit is zero.
3
2
1
0
BP1
BP0
WEL
RDY
BLOCK PROTECTION BITS
Status Register Bits
BP1
BPO
0
0
0
1
1
0
1
1
Array Address
Protected
25C128
25C256
None
None
3000-3FFF
6000-7FFF
2000-3FFF
4000-7FFF
0000-3FFF
0000-7FFF
Protection
No Protection
Quarter Array Protection
Half Array Protection
Full Array Protection
WRITE PROTECT ENABLE OPERATION
WPEN
0
0
1
1
X
X
WP
X
X
Low
Low
High
High
WEL
0
1
0
1
0
1
Protected
Blocks
Protected
Protected
Protected
Protected
Protected
Protected
Unprotected
Blocks
Protected
Writable
Protected
Writable
Protected
Writable
Status
Register
Protected
Writable
Protected
Protected
Protected
Writable
Doc. No. 25088-00 1/01
6
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]