datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

MTV030N View Datasheet(PDF) - Myson Century Inc

Part Name
Description
View to exact match
MTV030N Datasheet PDF : 21 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
MYSON
TECHNOLOGY
MTV030
Name
SSB
SDA
SCK
RIN
GIN
BIN
NC
PWM0
PWM1
PWM2
PWM3
PWM4
VDD
VFLB
INT
FBKG
BOUT
GOUT
ROUT
VSS
Pin No.
I/O
N16 N201 N202 N24
Descriptions
I 6 6 6 6 Serial interface enable. It is used to enable the serial data
and is also used to select the operation of I2C or SPI bus. If
this pin is left floating, I2C bus is enabled, otherwise the SPI
bus is enabled.
I 7 7 7 7 Serial data input. The external data transfer through this pin to
internal display registers and control registers. It has an inter-
nal pull-up resistor.
I 8 8 8 8 Serial clock input. The clock-input pin is used to synchronize
the data transfer. It has an internal pull-up resistor.
I - - 9 9 Red video input. It is used for auto sizing measurement and
this signal is came from video pre-amp red output.
I-
- 10 10 Green video input. It is used for auto sizing measurement and
this signal is came from video pre-amp green output.
I-
- 11 11 Blue video input. It is used for auto sizing measurement and
this signal is came from video pre-amp blue output.
- - - 12 - No connection.
O - 9 - 12 Open-Drain PWM D/A converter 0. The output pulse width is
programmable by the register of Row 15, Column 23.
O - 10 - 13 Open-Drain PWM D/A converter 1. The output pulse width is
programmable by the register of Row 15, Column 24.
O - 11 - 14 Open-Drain PWM D/A converter 2. The output pulse width is
programmable by the register of Row 15, Column 25.
O - 12 - 15 Open-Drain PWM D/A converter 3. The output pulse width is
programmable by the register of Row 15, Column 26.
O - - - 16 Open-Drain PWM D/A converter 4. The output pulse width is
programmable by the register of Row 15, Column 27.
- 9 13 13 17 Digital power supply. Positive 5 V DC supply for internal digi-
tal circuitry and a 0.1uF decoupling capacitor should be con-
nected across to VDD and VSS.
I 10 14 14 18 Vertical input. This pin is used to input the vertical synchroniz-
ing signal. It is leading triggered and has an internal pull-up
resistor.
O 11 15 15 19 Intensity color output. 16-color selection is achievable by
combining this intensity pin with R/G/B output pins.
O 12 16 16 20 Fast Blanking output. It is used to cut off external R, G, B sig-
nals of VGA while this chip is displaying characters or win-
dows.
O 13 17 17 21 Blue color output. It is a blue color video signal output.
O 14 18 18 22 Green color output. It is a green color video signal output.
O 15 19 19 23 Red color output. It is a red color video signal output.
- 16 20 20 24 Digital ground. This ground pin is used to internal digital cir-
cuitry.
3/21
MTV030 Revision 1.0 10/15/1999
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]