datasheetbank_Logo     データシート検索エンジンとフリーデータシート

SN74LS373 データシートの表示(PDF) - ON Semiconductor

部品番号コンポーネント説明メーカー
SN74LS373 Octal Transparent Latch with 3-State Outputs; Octal D-Type Flip-Flop WITH 3-STATE OUTPUT ON-Semiconductor
ON Semiconductor ON-Semiconductor
SN74LS373 Datasheet PDF : 8 Pages
1 2 3 4 5 6 7 8
20
1
Z
D
e
b
0.13 (0.005) M
SN74LS373, SN74LS374
PACKAGE DIMENSIONS
M SUFFIX
SOEIAJ PACKAGE
CASE 967–01
ISSUE O
11
E HE
10
A
A1
0.10 (0.004)
LE
M_
VIEW P
L
DETAIL P
Q1
c
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSIONS D AND E DO NOT INCLUDE MOLD
FLASH OR PROTRUSIONS AND ARE MEASURED
AT THE PARTING LINE. MOLD FLASH OR
PROTRUSIONS SHALL NOT EXCEED 0.15 (0.006)
PER SIDE.
4. TERMINAL NUMBERS ARE SHOWN FOR
REFERENCE ONLY.
5. THE LEAD WIDTH DIMENSION (b) DOES NOT
INCLUDE DAMBAR PROTRUSION. ALLOWABLE
DAMBAR PROTRUSION SHALL BE 0.08 (0.003)
TOTAL IN EXCESS OF THE LEAD WIDTH
DIMENSION AT MAXIMUM MATERIAL CONDITION.
DAMBAR CANNOT BE LOCATED ON THE LOWER
RADIUS OR THE FOOT. MINIMUM SPACE
BETWEEN PROTRUSIONS AND ADJACENT LEAD
TO BE 0.46 ( 0.018).
MILLIMETERS
DIM MIN MAX
A
--- 2.05
A1 0.05 0.20
b 0.35 0.50
c 0.18 0.27
D 12.35 12.80
E 5.10 5.45
e
1.27 BSC
HE 7.40 8.20
L 0.50 0.85
LE 1.10 1.50
M
0 _ 10 _
Q1 0.70 0.90
Z
--- 0.81
INCHES
MIN MAX
--- 0.081
0.002 0.008
0.014 0.020
0.007 0.011
0.486 0.504
0.201 0.215
0.050 BSC
0.291 0.323
0.020 0.033
0.043 0.059
0 _ 10 _
0.028 0.035
--- 0.032
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
Literature Fulfillment:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada
Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada
Email: ONlit@hibbertco.com
N. American Technical Support: 800–282–9855 Toll Free USA/Canada
JAPAN: ON Semiconductor, Japan Customer Focus Center
4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031
Phone: 81–3–5740–2700
Email: r14525@onsemi.com
ON Semiconductor Website: http://onsemi.com
For additional information, please contact your local
Sales Representative.
http://onsemi.com
8
SN74LS373/D
Direct download click here

 

Share Link : 

All Rights Reserved © datasheetbank.com 2014 - 2019 [ 個人情報 保護方針 ] [ リクエストデータシート ]