74AHC245PW View Datasheet(PDF) - Philips Electronics
Part Name
Description
View to exact match
74AHC245PW Datasheet PDF : 20 Pages
| |||
Philips Semiconductors
Octal bus transceiver; 3-state
Product specification
74AHC245; 74AHCT245
FEATURES
• ESD protection:
HBM EIA/JESD22-A114-A
exceeds 2000 V
MM EIA/JESD22-A115-A
exceeds 200 V
CDM EIA/JESD22-C101
exceeds 1000 V
• Balanced propagation delays
• All inputs have a Schmitt-trigger
action
• Inputs accepts voltages higher than
VCC
• For AHC only:
operates with CMOS input levels
• For AHCT only:
operates with TTL input levels
• Specified from
−40 to +85 and +125 °C.
DESCRIPTION
The 74AHC/AHCT245 is a
high-speed Si-gate CMOS device.
The 74AHC/AHCT245 is an octal
transceiver featuring non-inverting
3-state bus compatible outputs in
both send and receive directions.
The 74AHC245/74AHCT245 features
an Output Enable (OE) input for easy
cascading and a send/receive (DIR)
input for direction control.
OE controls the outputs so that the
buses are effectively isolated.
FUNCTION TABLE
See Note 1.
INPUTS
OE
DIR
L
L
L
H
H
X
Note
1. H = HIGH voltage level;
L = LOW voltage level;
X = don’t care;
Z = high-impedance OFF-state.
INPUTS/OUTPUTS
An
A=B
inputs
Z
Bn
inputs
B=A
Z
QUICK REFERENCE DATA
GND = 0 V; Tamb = 25 °C; tr = tf ≤ 3.0 ns.
SYMBOL PARAMETER
CONDITIONS
TYPICAL
UNIT
AHC AHCT
tPHL/tPLH
propagation delay CL = 15 pF;
An to Bn, Bn to An VCC = 5 V
3.5 5.0 ns
CI
input capacitance VI = VCC or GND 3.5 3.5 pF
CO
output
capacitance
4.0 4.0 pF
CPD
power dissipation CL = 50 pF;
12
15
pF
capacitance
f = 1 MHz;
notes 1 and 2
Notes
1. CPD is used to determine the dynamic power dissipation (PD in µW).
PD = CPD × VCC2 × fi + ∑ (CL × VCC2 × fo) where:
fi = input frequency in MHz;
fo = output frequency in MHz;
∑ (CL × VCC2 × fo) = sum of outputs;
CL = output load capacitance in pF;
VCC = supply voltage in Volts.
2. The condition is VI = GND to VCC.
1999 Sep 28
2
|
|
Share Link: 